Rohde & Schwarz VENICE S, Руководство пользователя

Страница: 43 / 126

Product Description

The Rear of the System
43 VENICE S | User Manual | 2906.1345.02 - 02
Rohde & Schwarz GmbH & Co. KG
Out- or Input of Master/Slave Control Signals
RJ45 connector
During a standard operation the pin-outs of the RJ45 connector
are adjusted to slave. To use the full functionality of this
connector you have to use the supplied adapter cable. For more
information about the cable see chapter “Adapter Cable” on
page 56. For the pin assignment see chapter “RJ45 Connector”
on page 54.
With software version 4 in normal operation VENICE S is slave.
With software version 3.5 it is possible to change between
master and slave in the R&S
®
VENICE Client software.
Downconvert Video Output
HD-BNC connector
The downconvert video output can be used for HD monitoring
while the system is configured for UHD operation. The down-
convert functionality is only active with UHD or 4K rasters. If
enabled the UHD material will be send via the SDI outputs (1
channel operation) and the HD material via the downconvert
output. In principle the signal is suitable for broadcast opera-
tions (e.g. Simulcast Playout). Please note the following restric-
tions.
Ingest signals (e.g. ingest of external satellite feeds),
which are asynchronously to the output can cause
frame repetitions or drop frames.