Rohde & Schwarz SMM-K507, Руководство пользователя, Страница: 6 / 51

Welcome to the ARB ethernet upload option
R&S
®
SMM-K507
6 User Manual 1179.5718.02 ─ 02
1.2 Accessing the ARB ethernet upload dialog
To open the dialog with ARB ethernet upload settings
1. In the block diagram of the R&S SMM100A, select "Baseband > ARB".
2. Select "Mode > Ethernet Upload".
The dialog provides general settings for ARB Ethernet upload.
The signal generation is not started immediately. To start signal generation with the
default settings, select "State > On".
1.3 What's New
This manual describes firmware version FW 5.10.035.xx and later of the
R&S
® SMM100A.
Compared to the previous version, it provides the new features listed below:
●
Step-by-step instructions added to prepare waveform data and configure the host
PC, see
Chapter 3.2, "Configuring the host PC" , on page 13.
●
Detailed I/Q over Ethernet protocol information including protocol specification and
waveform upload flow diagram and upload sequences, see
Chapter A, "I/Q over
Ethernet (QSFP+) protocol" , on page 38.
●
Python scripting example for waveform data transfer from the host PC to the
R&S
SMM100A, see Example"To transfer waveform data" on page 46.
●
Editorial changes.
1.4 Documentation overview
This section provides an overview of the R&S SMM100A user documentation. Unless
specified otherwise, you find the documents at:
www.rohde-schwarz.com/manual/smm100a
1.4.1 Getting started manual
Introduces the R&S SMM100A and describes how to set up and start working with the
product. Includes basic operations, typical measurement examples, and general infor-
mation, e.g. safety instructions, etc. A printed version is delivered with the instrument.
Documentation overview