Rohde & Schwarz SMM-K507, Руководство пользователя, Страница: 12 / 51

Uploading waveform files
R&S
®
SMM-K507
12 User Manual 1179.5718.02 ─ 02
3 Uploading waveform files
This chapter provides an overview on how to prepare, configure and operate the
R&S
SMM100A for waveform upload via the QSFP+ interface.
● Connecting the R&S SMM100A ..............................................................................12
● Configuring the host PC ..........................................................................................13
● Configuring the R&S SMM100A ..............................................................................15
● Activating and monitoring waveform upload ........................................................... 15
3.1 Connecting the R&S SMM100A
This chapter provides step-by-step descriptions for connecting the R&S SMM100A with
the host PC. The step-by-step descriptions cover the following topics:
●
QSFP+ interface: "To connect to HS Dig I/Q" on page 12
●
LAN interface: "To connect to LAN" on page 13
To connect to HS Dig I/Q
You can connect three interface types of the Ethernet card at the host PC to the QSFP
+ interface (HS Dig I/Q) of the R&S
SMM100A.
1. For connection, use high-quality cables and adapters depending on the interface
that you are using. The table Table 3-1 lists cables and adapters required for each
interface type.
Table 3-1: Cables and adapters for the QSFP+ interface
Interface type Host PC interface Cable Adapter
Electrical (10G) 10 Gbit Ethernet card RJ45 CAT7 RJ45 to SFP+ and
SFP+ to QSFP+
Optical (10G) 10 Gbit Ethernet card SFP+ cable SFP+ to QSFP+
Optical (40G) 40 Gbit Ethernet card QSFP+ cable
(e.g. R&S DIGIQ-HS)
-
2. Hold the QSFP+ plug of the cable or adapter by its panes.
3. Turn the QSFP+ cable or adapter, so that the release tab shows upwards.
4. Insert and push the QSFP+ plug into the QSFP+ cage.
For a detailed description, see chapter "Connecting to HS Dig I/Q" in the
R&S
SMM100A user manual.
Connecting the R&S SMM100A