Rohde & Schwarz SCV8000E/R, Системное руководство

Страница: 62 / 214

Chapter 3 Installation
2104.6536.72 - 3.4 - E-1
Fig. 2 Test outputs on front panel of R&S SX801
Connector on front panel
2.1.2 Connections on the Amplifiers
Fig. 3 Rear-panel amplifier connections (here: extended amplifier)
1) MAINS (X1, AC supply input)
2) RF IN 1 (X10, RF input, exciter A)
3) RF IN 2 (X110, RF input, exciter B, for passive dual drive; base amplifier only)
4) BASE AMP IN (X34, combiner RF input 1 for signal from base amplifier; extended amplifier only)
5) EXT AMP IN (X36, combiner RF input 2 for signal from extended amplifier; extended amplifier only)
6) EXT AMP OUT (X15, RF output to extended amplifier; base amplifier only)
7) POWER OUT (X2, RF power output 300 W)
X66 GPS
(GPS antenna)
SMA, female, 50

Connection for optional GPS antenna
X67 Rx
(Receiver)
SMA, female, 50

Retransmitter option: Antenna input
for receiver module
X68 Rx AUX
(Receiver auxiliary)
SMA, female, 50

Retransmitter option: AUX antenna
input for receiver module
No.
Labeling
(name)
Type Connector
X61 RF
(RF monitor)
SMA, female, 50

RF test output
No.
Labeling
(Name)
Type Connector