manualshive.com logo in svg

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 50 / 123

Поделиться
Скачать
Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 50

Trying Out the Instrument

R&S

®

RTE

42

Getting Started 1326.1026.02 ─ 06

The dialog box turns into a mini box that contains only the "Wfm Arithmetic"
setting.

5. Select 

Envelope

 and check the waveform.

The instrument sets the "Decimation" type automatically to 

Peak detect

 to dis-

play the correct envelope waveform.

6. Select 

Average

 and check the waveform.

7. Tap the   "Maximize" icon in the mini dialog box.

The complete "Acquisition" dialog box is restored.

8. Close the dialog box by tapping  .

4.3

Changing the Waveform Scaling and Position

As you can see on the y-axis of the display, the calibration signal has a vertical
offset of about 550

 

mV. The value can differ.

This value is also indicated in the signal icon for channel1 (2nd row). If you press
the CH1 key, the "Vertical" settings dialog box also displays the "Offset" value.
The offset is the DC component of the signal.

 

Changing the Waveform Scaling and Position

Содержание RTE-COM4




























































































































Отзывы:

Нет отзывов