manualshive.com logo in svg

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 36 / 123

Поделиться
Скачать
Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 36

Instrument Tour

R&S

®

RTE

28

Getting Started 1326.1026.02 ─ 06

PRESET

Resets the instrument to a default state. All measurements, mask tests, zoom,
and most individual settings are deleted, and all channels except for channel 1
are disabled. You can define preset configurations and save them to a file. The
PRESET key can be configured to set either factory defaults or a user-defined
preset configuration.

FILE

Opens and closes the "File" dialog box, where you can:

●

Save instrument settings

●

Load instrument settings which were saved before

●

Save waveform data and measurement results

●

Define a naming pattern for autonaming of files

SETUP

Opens and closes the "Setup" dialog box, where you can:

●

Access Windows configuration and install firmware updates

●

Configure the touchscreen

●

Check and install option keys for software options

●

Check availability of hardware options

●

Configure LXI and GPIB (if installed)

PRINT

Performs the action that is assigned to the key in "File" menu > "Frontpanel
Setup" > "Hardkeys". By default, the key saves a screenshot of the waveform dis-
play.

HELP

Opens the appropriate help topic for the active tab. If no dialog box is open, the
contents page of the help appears.

MODE

Opens and closes a dialog box where you can change the instrument mode:

●

Enable High Definition mode

●

Enable functionality in beta state

T-SCREEN LOCK

Locks the touchscreen to prevent unintended use. When the touchscreen is off,
the key is illuminated. Press again to unlock the touchscreen.

Keys and Controls

Содержание RTE-COM4




























































































































Отзывы:

Нет отзывов