manualshive.com logo in svg

Rohde & Schwarz RTE-COM4, Начало работы, Страница: 102 / 123

Поделиться
Скачать
Rohde & Schwarz RTE-COM4 Скачать руководство пользователя страница 102

Operating the Instrument

R&S

®

RTE

94

Getting Started 1326.1026.02 ─ 06

Tap the icon and drag a rectangle on the diagram to mark the area to be zoomed.
The diagram changes and shows the magnified area. To return to the previous
display, use the "Undo" function.

Coupled zoom ← Zoom

Creates a coupled zoom area and its related zoom diagram. If you change

the size of one zoom area, the size of all coupled zoom areas is changed as well.
First, create a zoom using the "Standard" zoom. Then tap "Coupled zoom" and
tap the existing zoom area. The zoom area is duplicated. Drag the duplicate to
the required position.

Fingertip zoom ← Zoom

Magnifies the waveforms around your fingertip.

Tap the icon and put your finger on the waveform. The touched part of the wave-
form is displayed in a magnifier. Drag your finger on the screen to move the mag-
nifier. You can change the zoom factor using the Navigation knob.

Search

Performs a search according to the settings in the "Search Setup" dialog

box. Tap the icon and then tap the diagram with the waveform to be searched, or
drag a rectangle to define a search gate. The search is performed on the selected
waveform.

Cursor

The cursor icon shows the last selected cursor type. A short

tap on the icon activates the selected cursor.
If you touch the icon and drag your finger down, a menu opens where you can
select another cursor type: horizontal cursors, vertical cursors, or both.
Tap the diagram where you want to set the cursors, or draw a rectangle in the
diagram to position the cursor lines. The resulting cursor lines measure the
selected waveform. The results appear in the "Cursor Results" box. You can
adjust the cursor source, type and position in the result box. Move the cursor lines
by dragging them in the diagram, or by turning the navigation knob. Pressing the
knob switches the parameter to be changed.

Mask

Starts the on-screen mask definition and the testing against the defined

mask.

Toolbar

Содержание RTE-COM4




























































































































Отзывы:

Нет отзывов