Rohde & Schwarz RT-ZF2, Руководство пользователя

Страница: 9 / 9

Test Equipment
R&S
®
RT-ZF2
9 Manual 1317.5551.02 ─ 08
For precise power spectral density and power level measurements up to
3
GHz, it is recommended to use an oscilloscope and a differential probe
with 3 GHz bandwidth each.
– Differential probe with at least 3 GHz bandwidth
– R&S
RTO/R&S RTP-K23 10GBASE-T Ethernet compliance test option
(required option, installed on the R&S RTO/R&S RTP)
– R&S RT-ZF2 Ethernet test fixture set
●
100BASE-T1 compliance tests:
– R&S RTO/R&S RTP oscilloscope with at least 600 MHz bandwidth
– Differential probe with 1 GHz bandwidth
– R&S
RTO/R&S RTP-K24 100BASE-T1 compliance test option (required
option, installed on the R&S RTO/R&S RTP)
– R&S RT-ZF2 Ethernet test fixture set
– R&S RT-ZF3 frequency converter for transmitter distorsion tests
●
1000BASE-T1 compliance tests:
– R&S RTO/R&S RTP oscilloscope with at least 2 GHz bandwidth
– Differential probe with 2 GHz bandwidth
– R&S
RTO/R&S RTP-K87 100BASE-T1 compliance test option (required
option, installed on the R&S RTO/R&S RTP)
– R&S RT-ZF2 Ethernet test fixture set
– R&S RT-ZF6 frequency converter for transmitter distorsion tests
●
The free-of-charge R&S ScopeSuite software, which can be installed on a
computer or directly on the oscilloscope.
●
R&S RTO-B6/R&S RTP-B6/Tabor WX2182B/Tabor WX2182C arbitrary wave-
form generator for automatic disturber tests. For 100BASE-T1 disturber tests,
also HMF2550 can be used.
●
R&S ZVL/ZNB/ZNC/ZND vector network analyzer for automatic return loss
measurements.
For manual measurements, also other AWGs and VNAs can be used.