Rohde & Schwarz R&S VENICE 2U, Руководство по оборудованию

Страница: 63 / 90

5-11 VENICE 2U | Hardware Guide | Version 1.2
Rohde & Schwarz DVS GmbH
Maintenance
 Power Supply Maintenance
5. Change the power supply unit against a new and operable one.
6. Slide the new unit into the power supply until it clicks into place.
7.
Connect the power source (power cord) to the newly installed
power supply unit.
8.
After that check the LED indicating the status of the power supply
unit: If it is lit up in green, the unit is working properly.
With this the power supply unit has been replaced successfully.
High voltages
The system you are working on operates with voltages that
can be hazardous to your health.
Do not reach inside the system when removing a
power supply unit or when the unit is out of the sys-
tem.
Other spare parts
Others than the original manufacturer spare parts might damage
your system.
Only use original manufacturer spare parts.
When completely inserted please observe that the latch is truly in place
and locking the unit.