Rohde & Schwarz R&S VENICE 2U, Руководство по оборудованию

Страница: 35 / 90

2-21 VENICE 2U | Hardware Guide | Version 1.2
Rohde & Schwarz DVS GmbH
Overview
 Overview of the Rear
No. Item Explanation
1 LAN ports 1 10-Gbit/s Ethernet (optical SFP+) connec-
tion ports to connect the system to a net-
work (LAN and WAN). The upper
connector’s state (network connector
LAN 0) is indicated by the LAN 0 LED and
the lower connector’s state (network con-
nector LAN 1) by the LAN 1 LED within the
operation items (see section “Operation
Items” on page 2-8).
Please observe that you need
SFP+ modules to make use of the
Ethernet connection ports.
2 LAN ports 2
(eth0)
1-Gbit/s Ethernet (1000 Base-T) connection
ports to connect the system to a network.
The upper connector’s state (network con-
nector LAN 2) is indicated by the LAN 2
LED and the lower connector’s state (net-
work connector LAN 3) by the LAN 3 LED
within the operation items (see section
“Operation Items” on page 2-8).
2a IPMI
(eth1)
Dedicated LAN port for IPMI v2.0 (Intelli-
gent Platform Management Interface) pro-
viding SNMP and KVM (Keyboard, Video,
Mouse redirection) as well; for further infor-
mation see section “SNMP – Simple Net-
work Management Protocol” on page 2-25
or the documentation(s).
3 USB 2.0 ports These USB 2.0 connectors (universal serial
bus) offer you the possibility to connect oth-
er devices (e.g. mouse and keyboard) to
your system.
4 VGA DB-15 connector (female) to connect a
monitor; normally with an extra graphics
card installed, this connector will not be op-
erational; however, it can be used in combi-
nation with IPMI/KVM for system
management; if you want to use this port,
please contact R&S DVS directly in case of
setup questions.
5 COM port RS-232 connector for the connection of se-
rial interface devices