Preparing the installation
19
Administration manual 4603.7988.02 ─ 03
1. Access the UEFI.
a) With [Shift] pressed, restart the workstation.
b) On the "Choose an option" page, click "Troubleshoot" > "Advanced Options" >
"UEFI Firmware Settings" > "Restart".
The workstation restarts and the UEFI is displayed.
Tip:
You can access the UEFI by pressing a hotkey right after you power on the
workstation. The hotkey differs between systems, the most frequent being [F2],
[DEL] and [ESC].
2. In the UEFI, navigate to the Secure Boot settings.
Note:
The Secure Boot settings are usually located under "Security" or "Boot".
3. Change the Secure Boot status to "[Enabled]".
4. To save and exit, follow the instructions of the UEFI.
You have enabled Secure Boot on the workstation.
Configuring Secure Boot (UEFI/GPT)
