manualshive.com logo in svg

Rohde & Schwarz R&S FPS, Начало работы

Поделиться
Скачать
Rohde & Schwarz R&S FPS Скачать руководство пользователя страница 59

Instrument Tour

R&S

®

FPS

36

Getting Started 1319.3362.02 ─ 07

3.3.1

OCXO Option (R&S

 

FPS-B4)

This option generates a 10 MHz reference signal with a very precise frequency. If
installed, and if no external signal is used, this signal is used as an internal refer-
ence.

Warm-up time for OCXO

When the instrument is switched on, the OCXO requires an extended
warm-up time (see data sheet). No warm-up time is required when starting
from standby mode.

3.3.2

Bandwidth Extension 160 MHz (R&S

 

FPS-B160)

The signal analysis bandwidth of the R&S

 

FPS can be extended by a hardware

option (R&S

 

FPS-B160). The bandwidth extension allows for a linear bandwidth

up to a maximum of 160 MHz with an output sample rate of up to 10 GHz. While
the extension can be activated or deactivated manually in the R&S

 

FPS base unit

(I/Q Analyzer application), it is activated automatically in some applications that
also support I/Q data analysis. See the application-specific documentation for
details.

 

 

Additional Hardware Options Without External Connectors

Содержание R&S FPS





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды