Rohde & Schwarz Hameg HZ355, Руководство пользователя

Страница: 7 / 12

Subject to change without notice
7
Maintenance
Handle with care especially when fi tted with the
extra thin and sharp spring contact tip to avoid any
injury. Note that the probe cable is a sensitive part
of the probe. Do not damage through excessive
bending or pulling. Avoid mechanical shock to
this product in general to guarantee accurate
performance and protection.
Cleaning
To clean the exterior of the probe use a soft
cloth moistened with either distillated water or
isopropyl alcohol. Before use allow the probe to
dry completely.
Changing the probe tip
To change the probe tip use pliers to grip and pull
it carefully straight out of its contact socket, along
the axis of the probe. Do not grip the white plastic
insulator or the housing with pliers, because the
tip could be squeezed and cannot be removed
and respectively the probe could be damaged.
If the probe tip is removed, the new tip can be
inserted with pliers into the contact socket, along
the axis of the probe. In order to insert the probe
tip completely into the housing, press the probe
tip against a hard surface carefully.
Included in Delivery
The following items are included in the scope
of delivery (please refer also to the appendix on
page 10).
Item Qty SP1
1)
SP2
2)
Operators manual
(GER, UK)
1x
Spring tip, gold plated
0.5 mm (fi tted in probe)
1x 1x 5x
Solid tip CuBe 0.5 mm
(attached in tube)
1x 1x 1x
Ground-Blade 2.5 (moun-
table spring tip, gold plated)
1x 1x 2x
IC-Cap 2.5
0.5 mm pitch; green
1x 1x
IC-Cap 2.5
0.65 mm pitch; blue
1x 1x
IC-Cap 2.5
0.8 mm pitch; grey
1x 1x
IC-Cap 2.5
1.0 mm pitch; brown
1x 1x
IC-Cap 2.5
1.27 mm pitch; black
1x 1x
Insulating cap 2.5 black,
10 mm long
1x 1x
Hook clamp 2.5
(mountable to probe)
1x 1x
Coding rings (Set)
3x4 colours
1x 1x
Sprung hook 2.5 (spiral spring) 1x 1x 1x
Ground lead 15 cm 1x 1x
PCB Adapter Kit 2.5 (1x GND-
fan, 2x soldering sleeve)
1x 1x
PCB Adapter Kit 2.5 (1x GND-
fan, 5x soldering sleeve)
1x
Probe, 500 MHz 1x
Protection cap 2.5
(black, attached on probe)
1x 1x
Self adhesive Cu-Cap
(2x2 cm)
2x 1x
Adjustment tool 1x 1x
2 Footer positioner 1x 1x
1) SP1 = Spare Part-KIT 1, Standard Spare Part-KIT
(like incl. in delivery), Item-No. 29-0355-K001
2) SP2 = Spare Part-KIT 2, Incidental Spare Part-KIT,
Item-No. 29-0355-K002
Use pliers to grip
and pull the probe
tip carefully out of
its contact socket. Do not grip the white
plastic insulator or the
probe housing with
pliers.
P r o b e H Z 3 5 5