Rohde & Schwarz GB4000V, Руководство пользователя

Страница: 37 / 70

R&S GB4000V Audio Unit
User Manual 6174.7514.02 - 02 35
3.9.2 Device Configuration
The audio unit can be configured via the Ethernet using the integrated web server.
The currently set parameters of the audio unit can be read out.
The following requirements must be met in order to set up a connection to the web
server:

A computer with a web browser application must be available

The audio unit must be connected to Ethernet (see chapter “2.4 Cabling” )

The configuration computer and audio unit must be configured in such a way that
the network address and subnet mask allow communications. The default values
of the audio unit are listed in
“3.9.1 Factory Default Settings“
3.9.2.1
Content of the Web Interface
The web interface of the R&S GB4000V is HTTP-based. The audio unit can therefore
be configured and read out using any HTTP-capable web browser.
The web interface of the audio unit consists of 4 HTTP pages:
Page name Address Function
status http://<IP-address-GB4000V>/status
Example:
http://192.168.52.100/status Shows the status and inventory data of
the R&S GB4000V. (See Figure 14)
config http://<IP-address-GB4000V>/config
Example:
http://192.168.52.100/ config Shows the configuration data of the
R&S GB4000V; the displayed
parameters can be configured. (See
Figure 15)
config_acl http://<IP-address-GB4000V>/config_acl
Example:
http://192.168.52.100/config_acl Shows the configuration for the ACL
protocol; the data can be configured.
(See Figure 16)
config_voip http://<IP-address-GB4000V>/config_voip
Example:
http://192.168.52.100/ config_voip Shows the configuration for VoIP mode;
the data can be configured. (See Figure
17)
Table 13: Description of configuration interface of the R&S GB4000V.