manualshive.com logo in svg

Rohde & Schwarz DDF205, Начало работы

Поделиться
Скачать
Rohde & Schwarz DDF205 Скачать руководство пользователя страница 56

Software and Firmware Update

R&S

®

 DDF205

56

Getting Started 4073.0187.02 ─ 03

One image will contain an updated version of the receiver firmware as well as the
GUI. The receiver firmware will be updated first. The firmware will be copied from
USB flash drive to EEPROM on the processor board. The EEPROM needs to be
erased first, after which the program code will be downloaded and the checksum
calculated.

Flash erase and update

While updating a R&S

 

DDF205, portions of the flash memory will be erased.

This erase process may take up to two minutes, after which the new firmware
will be loaded. This will usually take about one minute. The update progress
is visualized by means of notification dialogs and progress bars.

Then, while the receiver resets, the GUI will be updated. The GUI runs on a dedi-
cated processor (IPS1) and has its own operating system. This processor also
needs to reboot once the update completed.

At the end of the process, when the dialog below is shown, press ENT to reboot.
Now both the receiver firmware and the GUI are updated with the latest version.
This can be verified after reboot by following the steps shown in 

​

chapter 4.1,

"Retrieve Firmware and GUI Versions"

, on page 49.

Receiver Firmware and GUI Update for DDF205 with front control panel

Содержание DDF205









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды