Rohde & Schwarz DDF205, Начало работы

Страница: 50 / 72

Software and Firmware Update
R&S
®
DDF205
50 Getting Started 4073.0187.02 ─ 03
The "Boot Program Version" refers to a stand-alone program whose only purpose
is to boot-up the R&S
DDF205.
For DDF205 with front control panel, it is therefore sufficient to update the receiver
firmware and GUI software: this will update all the images required for normal oper-
ation to the latest versions. The receiver firmware and GUI software will be updated
in the same procedure. This keeps the update process simple and prevents any
version conflict.
For DDF205 without front control panel only the receiver firmware needs to be
updated.
CD-ROM and Downloads
The R&S DDF205 is shipped together with a “DDF205 Software and Docu-
mentation CD ROM” which contains the same firmware and GUI versions as
in the R&S
DDF205 at the time of shipment. The latest versions can be down-
loaded from GLORIS.
The CD-ROM will autostart and launch the opening menu where the various
options are available. If the CD-ROM does not autostart or if the files are
obtained from the company website, launch the menu by running the
start.htm
in a suitable browser. Recommended is
Internet Explorer 7
.
The next few sections explain the steps needed for updating the receiver firmware
and GUI software (for DDF205 with front control panel) or only the receiver firmware
(for DDF205 without front control panel) respectively.
4.2 Receiver Firmware and GUI Update for DDF205
with front control panel
The update process for the DDF205 with front control panel is a combined proce-
dure which updates the receiver firmware and GUI software in one single process.
This process makes it transparent for the user which component is actually being
updated and version conflict will be avoided.
Receiver Firmware and GUI Update for DDF205 with front control panel