manualshive.com logo in svg

Rohde & Schwarz CMW-KM750, Руководство пользователя

Поделиться
Скачать
Rohde & Schwarz CMW-KM750 Скачать руководство пользователя страница 8

Preface

R&S

®

CMW-KM750/-KM751

8

User Manual 1173.9670.02 ─ 05

1.1.3 GUI Reference

The GUI reference describes the manual operation of the firmware application via the
Graphical User Interface (GUI).

The description of a configuration dialog usually starts with a screenshot presenting the
preset values of the parameters (sometimes preset values are modified to enable hidden
parts of a dialog). Below the screenshot all shown parameters are described. For each
single parameter a link to the corresponding command description in the "Command
Reference" is provided. Ranges for numeric parameters and reset values are given there.

For measurement results links to the corresponding command descriptions are provided
(commands to retrieve the results). The measurement results are described in detail in
the "General Description".

1.1.4 Programming Examples

The programming examples show how to control and configure the firmware application
via a remote-control program and how to retrieve measurement results. The examples
consist of comprehensive command sequences. You can check just a single command
of a sequence to get an example for the syntax of this single command. But you can also
consider an entire sequence showing the commands in the context of a command script,
under consideration of dependencies and required orders of the commands.

The command sequences are written with the intention to list most commands of the
firmware application. They do not show the fastest way for a given configuration task.
The fastest way would use many reset values and omit the corresponding commands.

The examples are referenced by the command descriptions of the "Command Refer-
ence".

1.1.5 Command Reference

The command reference provides information on the remote commands of the firmware
application. The commands are grouped according to their function.

Each command description indicates the syntax of the command header and of the
parameters. For input parameters the allowed ranges, reset values and default units are
listed, for returned values the expected ranges and default units. Most commands have
a command form and a query form. Exceptions are marked by "Setting only", "Query only"
or "Event". Furthermore a link to the "Programming Examples" is provided and the first
software version supporting the command is indicated.

 

 

 

How to Read Firmware Application Chapters

Содержание CMW-KM750

























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды