Rohde & Schwarz CLIPSTER 6 Mk2, Руководство пользователя

Страница: 33 / 78

Installation and Operation
33
User Manual (Hardware) | 2904.4460.02 - 04
Lifting and Carrying
CLIPSTER
Installation and Operation
This chapter describes the installation and operation of the CLIPSTER hard-
ware. The system must be installed properly before you can start working
with it.
This chapter is divided into the following topics:
●
Unpacking the System (page 33)
●
Mounting the System into a Rack (page 34)
●
Connecting Monitor, Mouse and Keyboard (page 38)
●
Operating the System (page 39)
Lifting and Carrying
We recommend to use lifting equipment, see also "Lifting and Carrying the
Product" on page 8.
Unpacking the System
Perform the following steps:
1. Unpack the product carefully.
2. Retain the original packing material. Use it to protect the control
elements and connectors when transporting or shipping the product later.
3. Check your delivery and compare it with the delivery note. In case of
missing items, please contact your vendor or R&S immediately.
4. Place the system on a flat surface to prepare it for mounting into the
rack.
The system is unpacked and ready for installation.
Risk of Injury
Lifting the system by yourself may result in serious injury and property
damage.
Do not attempt to lift the system by yourself, always get others to
assist you.