manualshive.com logo in svg

Rohde & Schwarz 1402.9557.02, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz 1402.9557.02 Скачать руководство пользователя страница 43

DVB-H User Interface

DVB-H

43

Operating Manual 1008.0970.12 ─ 16

3.5.5 Global Settings

The buttons in this section lead to dialogs for general trigger, clock and mapping set-
tings.

Global Trigger/Clock Settings

Calls the "Global Trigger/Clock/Input Settings" dialog.

This dialog is used among other things for setting the trigger threshold, the input impe-
dance and the polarity of the clock and trigger inputs.

The parameters in this dialog affect all digital modulations and standards, and are
described in chapter "Global Trigger/Clock/Input Settings" in the Operating Manual.

User Marker / AUX I/O Settings

Calls the "User Marker AUX I/O Settings" dialog, used to map the connector on the
rear of the instruments.

See also "User Marker / AUX I/O Settings" in the Operating Manual.

 

Trigger/Marker/Clock Settings

Содержание 1402.9557.02

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды