Rohde & Schwarz 1402.9557.02, Руководство по эксплуатации

Страница: 23 / 80

DVB-H User Interface DVB-H
23 Operating Manual 1008.0970.12 ─ 16
Trigger/Marker
Calls the menu for selecting the trigger mode and trigger source, for configuring the
marker signals, and for setting the time delay of an external trigger signal.
This menu is described in chapter 3.5, "Trigger/Marker/Clock Settings" , on page 34.
The currently selected trigger mode and trigger source are displayed next to the but-
ton.
Remote command:
n.a.
Execute Trigger
Executes the trigger manually. A manual trigger can be executed only if an internal trig-
ger source and a trigger mode other than "Auto" have been selected.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:EXECute
on page 56
Arm
Stops signal generation manually. This button appears only with "Running" signal gen-
eration in the "Armed_Auto" and "Armed_Retrigger" trigger modes.
Remote command:
[:SOURce<hw>]:BB:DVB:TRIGger:ARM:EXECute
on page 56
Clock
Calls the menu for selecting the clock source and for setting a delay.
This menu is described in chapter 3.5.4, "Clock Settings" , on page 41.
Remote command:
n.a.
3.2 System Configuration
The "System Configuration" dialog allows to configure the DVB system. The DVB sys-
tem is displayed in form of a block diagram including all parameters necessary to con-
figure the system.
The system diagram depends on the selected "Hierarchy Mode".
System Configuration