2
Smart Home Monitoring | In-Wall Switch or In-Wall Dimmer | Manufacturer's Installation Guide
Installation Configurations
This switch may be used in new installations or to replace an existing wall switch.
It may be used in the following configurations:
›
By itself for 2-way control (one switch & one load)
›
By adding one Jasco Auxiliary Switch for 3-way control (two switches & one load)
›
By add two Jasco Auxiliary switches for 4-way control (three switches & one load)
When used by itself for 2-way control, please make sure that the screw terminal for the
traveler wire is insulated. Do not remove the tape over the terminal if you are not using
the traveler connection.
This dimmer switch is designed for use with permanently installed lighting fixtures only.
The switch has been optimized for use with incandescent lighting as well as with most
dimmable CFL and LED bulbs. The maximum load ratings for this switch are 600W for
incandescent bulbs and 150W for dimmable CFL and LED’s. Lighting controlled by this
switch must not exceed these stated limits.
