Step 5
Connect the upper hand pulse wires (56) to the extension hand pulse wires (55) from
the hole of bracket. Connect the upper computer wire (57) to the middle computer
wire (51). Attach the computer (10) to the bracket of the handlebar post (9). Secure
by using two screws (20) which are pre-assembled on the back of computer.
Note:
It will be necessary to move the wires around the handlebar post and away
from the monitor bracket to avoid pinching the wires.
Step 6
Loosen the screws (25), then attach the front stationary handle bar cover (24) to the
stationary handlebar (11). Attach the stationary handlebar (11) to the back of the
handlebar post (9). Secure by using two hex head screws (28) and two flat washers
(4).
Connect the hand pulse wire (58) to the extension hand pulse wire (55) from the
handlebar post. Then attach the rear stationary handlebar cover (49) to the
handlebar post. Secure by using two screws (25) and two screws (45) which are
pre-assembled on the covers.