Assembly Instructions
a.
Remove the battery cover from the back of the Computer (
7
) and insert two AA batteries.
b.
Connect Sensor Wire
Ⅰ
(
89
) to the sensor wire from Computer (
7
).
c.
Loop two pulse sensor wires (
7
) through the hole on the top of Front Post (
5
), then out from the two
side holes of the Front Post (
5
).
d.
Attach the Computer (
7
) to the bracket on the top of the Front Post (
5
) using 2 x 10mm Dome Head
Philips Bolts (
14
).
Note
:
Two bolts (
14
) were pre-fixed to the back of the Computer (
7
).
e.
Attach the Handle Bar (
6
) to the bracket on the Front Post (
5
) using 1 x 40mm Allen Bolt (
12
).
f.
Connect two pulse sensor wires from Computer (
7
) to pulse sensor wires from two Handle Pulse
Sensor (
9
), feed the redundant wires into the Front Post (
5
) from two side holes, then cover the two
holes by using 2 x Wire Holder Rings (
108
) pre-fitted.
Step 5
10
Содержание Cross Trainer
Страница 21: ...Exploded Parts Diagram 20 ...
