MCX402-BRD Operating Manual
04.12.2020
12/13
4. LED OPN and LED SYS will switch off and device shall restart automatically with factory default
settings.
High level configuration (VISO)
The purpose of high level configuration is to define logical functioning of the expander which communicates
with the MC16 access controller and it depends on applied scenario of operation. The example of access
control system configuration is given in AN006 application note which is available at
5.
F
IRMWARE UPDATE
Factory new expander is equipped with a firmware dedicated to Wiegand readers. If the expander is to be
operated with PRT readers then another firmware must be uploaded. Such firmware is available at
. Firmware update requires RogerISP program.
Expander firmware update procedure:
1. Connect the device to RUD-1 interface (fig. 8) and connect the RUD-
1 to computer’s USB port.
2. Place jumper on FDM contacts
3. Restart device with RST button on device board or by switching supply off and on.
4. Start RogerISP software.
5. Select serial port emulated by RUD-1 interface and the option
USB-RS485 Converter
.
6. Select firmware file (*.hex), click
Program
and follow instructions on screen.
7. Once the firmware is uploaded remove the FDM jumper and restart the device.
8. Start Memory reset procedure.
6.
S
PECIFICATION
Table 4. Specification
Supply voltage
Nominal 18VAC, min./max. range 17-22VAC
Nominal 12VDC, min./max. range 10-15VDC
Nominal 24VDC, min./max. range 22-26VDC
Current
consumption
(average)
100 mA (excluding load points connected to AUX and/or TML outputs)
Battery charging current
300mA
Inputs
Eight (IN1..IN8) NO/NC inputs, triggering level app. 3.5V
Relay outputs
Two (REL1,REL2) relay outputs with isolated NO/NC contacts, 30V/1.5A
(REL1) and 230VAC/5A (REL2) max. loads
Transistor outputs
Two (IO1, IO2) transistor outputs, max load 15VDC/1A
Power supply outputs
Two power outputs (AUX, TML), 12VDC/0.2A (TML) and 12VDC/1A (AUX) max
loads
Distances
Up to 1200 m between controller and expander (RS485)
Up to 150m between expander and Wiegand or PRT terminals
IP Code
IP20
Environmental
class
(according
to
EN
50133-1)
Class I, indoor general conditions, temperature: +5°C to +40°C, relative
humidity: 10 to 95% (no condensation)
Dimensions W x S x G
80 x 115 x 28mm
Weight
100g
Certificates
CE
7.
O
RDERING INFORMATION
Table 5. Ordering information