Operating instructions
BA_M4301_EN
4 / 18
Mandatory signs
Number, available and un-
damaged
Further safety devices
available
available, undamaged and
ready for operation
Testing date:
Tester (signature):
(Number see "Position of safety devices")
1.9
Application
1.9.1
Intended use
The products are used in industrial applications to transform
hydraulic pressure to a linear movement and /or force. They
must only be operated with hydraulic oil.
Furthermore the following belongs to possible uses:
•
Use within the capacity indicated in the technical character-
istics (see data sheet).
•
Use as per operating instructions.
•
Compliance with service intervals.
•
Qualified and trained personnel for the corresponding activi-
ties.
•
Mounting of spare parts only with the same specifications
as the original part.
1.9.2
Misapplication
WARNING
Injuries, material damages or malfunctions!
•
Do not modify the product!
The use of these products is not admitted:
•
For the domestic use.
•
On pallets or machine tool tables in primary shaping and
metal forming machine tools.
•
If due to vibrations or other physical / chemical effects dam-
ages of the products or seals can be caused.
•
On pallets or machine tool tables that are used to change
the characteristics of the material (magnetise, radiation,
photochemical procedures, etc.).
•
In areas for which special guidelines apply, especially in-
stallations and machines:
-
For the use at fun fairs and in leisure parks.
-
In food processing or special hygiene regulations.
-
For military purposes.
-
In mines.
-
In explosive and aggressive environments (e.g. ATEX).
-
In medical engineering.
-
In the aerospace industry.
-
For passenger transport.
•
For applications other than vertical lifting of loads. Hanging
operation (e. g. from the ceiling) is inadmissible.
Special solutions are available on request!
1.10
Installation
1.10.1
Design
WARNING
Injury by falling parts!
•
Keep hands and other parts of the body out of the working
area.
•
Wear personal protection equipment!
CAUTION
Great weight may fall
Some product types have a considerable weight. These have
to be secured against working free during transport.
Weight specifications see chapter "Technical characteristics".
Transverse forces and forced conditions!
Side loads and forced conditions on the product lead to the
premature failure.
•
Avoid forced conditions (overdetermination) of the product.
•
Max. forces and torques see technical characteristics.
Figure 2: components
1
Bottom plate
2
Guide unit
3
Top plate
4
Lifting jack with foot
pedal
1.10.2
Fixing of the product
WARNING
Injury due to overturning product!
•
Overturning product due to missing or incorrect fixing!
•
Fasten bottom plate on the floor.
•
When introducing torques within the load limit (see technical
characteristics) we recommend to use an additional base
plate (accessory) and to secure this plate correctly.
1
2
3
4
