RODI systems AquaLynx 250 RO-AC-ENC-V2, Инструкция по установке и эксплуатации

Страница: 20 / 39

Operation 3
Controls The AL250-V2 is housed in a NEMA 4X enclosure with a membrane keypad.
Indicators include a 4 line x 20 character LCD with LED backlight and eight high
intensity LED indicators for alarm conditions. The control features of the AL250-V2
are illustrated below.
Keypad The membrane keypad contains 20 tactile keys which are used for a number of
control and data entry functions.
System Start : Pressing this key starts the system. If the Direct Feed mode has
been chosen, pressing the System Start key immediately initiates the
startup sequence. If the Tank Feed mode has been chosen, pressing
this key will not initiate the startup sequence unless the tank is below
high-level. Pressing this key in Stand-By mode will initiate the flush
sequence of flush cycles.
System Stop : Pressing this key stops the system and essentially turns all
functions off.
Alarm Reset : Pressing this key resets the system after an alarm shut down for
low pressure, high pressure, low quality, high temperature, overload, or
chemical injection failure (VANTAGE RO systems only).
LCD Display with Backlight
LED Alarm and Status Indicators
Keys Used for System Control
Keys Used for Data Entry
and Configuration
1 2 3
ENT
CLR
Main
Menu
5
6
4
7 8 9 0
SYSTEM RUN
SYSTEM STANDBY
ALARM RESET
ALARM SILENCE
ALARM
PRESSURE
LEVEL
STANDBY
QUALITY
FLOW
PRETREATMENT
SYSTEM RUNNING