Rodgers 790C, Руководство пользователя

Страница: 16 / 38

8
There is a lighted Crescendo/Tutti indicator located on the stop rail to the far right. There are
eight lighted green segments to indicate the progressive stages of the Crescendo as the pedal is
pressed.
Tutti
There are times when a full organ registration is needed immediately. Press the TUTTI piston to
access the Tutti combination. These pistons are reversible, so simply press again to cancel.
When Tutti is in use, the top four segments of the Crescendo/Tutti indicator light red. The
Crescendo/Tutti indicator is located on the stop rail to the far right.
Melody Coupler
The Melody Coupler (MELODY) is located on a tab in the Great division. The Melody Coupler
lights when it is engaged.
When MELODY is lit, any selected stop or MIDI voice in the Swell division sounds from the
highest key being played on the Great manual. This allows a solo melody and an accompaniment
to be played on the same manual.
In its default setting, the Melody Coupler affects keys 25 through 61 on the Great manual. The
lower end of its range is programmable and may be extended down to key 13 or up to key 49.
Note: The Melody Coupler can only be set in General combination pistons.
Setting Melody Coupler Range
1. Press and hold the SET piston and press MELODY, which begins flashing.
2. Release the SET piston.
3. While the Melody Coupler is flashing, press a key that corresponds to the lowest note the
range is to extend. You may select any note from key 13 to key 49. After the selected key
has been pressed, the Melody Coupler turns off.
Note: When you press a key to set the range, no sound is heard even if stops are on, so no
disturbance is made if programming during a performance.
4. To use the new range, press MELODY. This range is saved when the organ is turned off.
Bass Coupler
The Bass Coupler (BASS) is located on a tab in the Great division. The name of this feature is
derived from the historical term Basso Continuo meaning thoroughbass. When the Bass Coupler
is engaged, it lights. Any selected stops or couplers in the Pedal division sound from the lowest
key being played on the Great manual. This provides a pedal bass sound without actually
playing the pedalboard.
In the default setting, the Bass Coupler affects keys 1 through 24 of the Great manual, but its
range is programmable up to key 32 (top of the pedalboard range).
Setting Bass Coupler Range
1. Press and hold the SET piston and press BASS, which begins flashing.