Rodgers 790C, Руководство пользователя

Страница: 24 / 38

16
2. Turn the Select knob clockwise (right) until the cursor moves to NORM on the second MIDI
menu screen.
3. Rotate the Alpha dial to the desired setting (UP 2, UP 1, NORM, DN 1 or DN 2).
4. Press either the flashing MIDI coupler piston or General Cancel to exit.
MIDI Channel Assignment
Using the Rodgers 790C as a MIDI keyboard controller for sequencing may require channel
assignment of the MIDI GT A coupler piston. All other MIDI coupler pistons transmit on fixed
channels. To reset the transmit channel of MIDI GT A, perform the following procedure.
Assigning MIDI Channels
1. Hold the SET piston, then press MIDI GT A. The coupler piston flashes.
2. Turn the Select knob clockwise (right) until the cursor moves to the channel number.
3. Rotate the Alpha dial to set the channel number.
4. Press either the flashing MIDI coupler piston or General Cancel to exit.
The channel number for MIDI GT A coupler piston can be saved in the settings on a
combination piston.
Sustain Switch
A foot switch is located on the top left edge of the Great/Pedal expression shoe. This switch
sustains MIDI sounds playing from MIDI GT A coupler piston. Press the switch to sustain,
release to stop.
Additional MIDI Settings on Combination Pistons
After additional MIDI settings have been selected on a MIDI coupler piston, these settings can
be saved on any General or corresponding Divisional combination piston.
Saving MIDI Settings on a Combination Piston
1. Select the MIDI coupler piston (and organ stops, if desired).
2. Press and hold the SET piston.
3. Press the desired combination piston.
4. Release both pistons.
The factory default settings for the MIDI coupler pistons are:
MIDI GT A = CH 1*
Program change (PGM) = OFF
Variation (VAR) = 0
Octave Transpose = NORM