Roda RSP-1000, Руководство по эксплуатации

Страница: 22 / 23

22
6 RECOMMENDATIONS FOR USE
- There is no point in setting the unit to this maximum, the room temperature will not rise any faster;
- When you air the room, disconnect the convector by putting the switch to “0”.
- If you leave for several hours, remember to reduce the temperature.
Absence for:
-
Less than 2 hours, do not touch the controls.
- 2 to 24 hours , lower the thermostat handle by two graduations or set the one of switches to “0” position.
- More than 24 hours or in the summer , set the thermostat handle to position

( Frost Free mode).
- If you have several units in a room, let them operate simultaneously.
This will give you a more uniform temperature without increasing electricity consumption.
7 MAINTENANCE
To maintain performances of your unit, you should clean the upper and lower grilles of the unit about twice
a year using a vacuum cleaner or a brush.
Dirt may collect on the grille of the unit if the atmosphere is polluted. This phenomenon is due to the poor
quality of the ambient air. In this case, it is recommended to check that the room is well ventilated (ventilation,
air inlet, etc.), and that the air is clean. The unit will not be replaced under the guarantee because of this type
of dirt.
The unit casing should be cleaned with a damp cloth, never use abrasive products.
Collect and recycling of end life products should be done according to the provisions of local ordinances
(DEE 2002/96/CE).
Products with this symbol should not be placed with garbage but must be collected separately and
recycled
Collect and recycling of end life products should be done according to the provisions of local
ordinances (DEE 2002/96/CE).