E1001A-171107
12
Typical set up:
ID
1
Timer Typical (sec)
Pressure loss
calibration
‘CAP
+Date’
30
Volume loss calibration
‘CAV
+Date’
60
Test
‘TE
+Date’
15
1
The Apps will automatically increment selected ID
Once setup
is completed, select: ‘Begin Calibration or Test’ to start.
Once calibration or testing is started, a window like the one below will be displayed.
After saving the initial readings, the operator should
press ‘Start’ for starting the timer.
Readings will be recorded when timer gets to 0 second. Then the operator can increase
the volume or pressure to the first step a
nd then press ‘Start’ for starting the timer, and
so on until completing the test.
When the calibration or test is over, press on :
For starting the timer.
Readings are
automatically recorded
each time timer gets to
zero
Graph is plotted here
Displays actual Pressure
and Volume readings
For stopping the
calibration/test
Displays last three
Volume and Pressure
Readings recorded