Rocstor
Rocpro T24
[9]
MINIMUM SYSTEM REQUIREMENTS
To utilize the RAID, the minimum system configuration in the host computer requires the following:
Mac Users:
3.5 or 2.5 inch SATA-compatible hard drive and/or 2.5-inch Solid State Drive(s) (SSD) are required for
the RAID System. Once the hard drive and/or SSD are formatted, the actual available storage
capacity can vary depending on the selected operating environment (normally 5-10 % less).
HARDWARE REQUIREMENTS AND PRECAUSIONS
1.
Whenever turning off or unplugging the RocproT24 Series from your computer system becomes
necessary, always remember to safely remove it from your operating system first.
2.
When the Rocpro T24 is connected to the computer system, it’s prohibited to remove, insert or swap
the hard drive while data transfer is being performed.
3.
If you will be incorporating either software or hardware RAID functionality to operate with the ST4
Series, it is important to understand the RAID level and its component that will be incorporated and
the precautions to take as each RAID level and component may function differently and contains
various limitations.
4.
If installing your own HDD, please make sure that the hard drives are free from bad blocks or defects
prior to installation in order to avoid system crashes or data loss.
5.
It is highly recommended for users to back up important data contained within the drives of the
Rocpro T24 Series on a regular basis or whenever the user feels necessary to a remote or a separate
storage device. Rocstor will not be responsible for any loss of data caused during the use of the T24
Series or the recovery of the data lost.
Hardware: Thunderbolt
port(s.)
Mac:
Any Mac with a Thunderbolt port running
OS X 10.9 or later.
Memory RAM:
4 GB RAM