Rocstor
Rocpro T24
[21]
Step 5. After RAID has been deleted, each of the HDD will revert to original connecting status individually.
Frequently Asked Questions
A.
ROCPRO T24 will goes into sleep mode when Thunderbolt cable is not connected, while fan and LED
indication of ROCPRO T24 will not be functioning until connecting with Thunderbolt cable.
B.
When ROCPRO T24 goes into sleep mode that fan and LED indication of ROCPRO T24 will not be
functioning, until ROCPRO T24 has been reactivated.
C.
If HDD was used for RAID in other devices, please revert the HDD to JBOD mode using original
device/software before install in ROCPRO T24.
D.
If monitoring software is being active for a period of time without accessing, please proceed with
refreshing or restarting the software for acquiring an updated status.
E.
If an older version of Marvell monitoring software has already been installed in the computer, please
remove it completely before installing the monitoring software from product CD to avoid the
occurrence of software corruptions.
E-Mail Notifications.
“Account Management” under “Management” on the left of managing window allows configuring for e-mail
notification by sending “Event Logs” which generated during the operation of ROCPRO T24.