Rocstor
Rocpro T24
[11]
Hard Drive Installation
1.
Open the package and take out the product making sure that all the enclosed contents are not
damaged or missing. Should you find damages or missing contents, please contact your supplier
immediately.
2.
Place the enclosure on a stable surface, ensure that it is well ventilated without blockage to the vent
and kept away from locations near water or where the product may become vulnerable resulting in
damages.
3.
Use the provided key in the accessories kit and inserted into the key access opening to eject the
removable drive tray latch and extract the removable drive tray.
4.
Mount your hard drives onto the removable drive tray and secure it with the screws included in the
accessory kit to avoid any damage to the hard drive due to accidental movements.
5.
Choose one of the provided cables of your preference to connect the preferred interface connection
on the enclosure unit to the computer.
6.
Attach the AC power cable to the power socket. Once completed, you may power on the unit.
7.
Once your computer has also booted, your operating system should recognize the drive automatically.
If the hard drive installed requires formatting, follow the formatting instructions given by the operating
system to format the drive volume to your preference. Once the formatting has been completed, the
device is ready for use.
IMPORTANT NOTE:
all hard drives installed MUST be RAID compatible hard drives, with same capacities
and speeds of 7,200 R.P.M. or higher and preferably from the same manufacturer of hard drives.