Rocom GSM500.GC, Руководство пользователя

Страница: 12 / 24

User guide GSM500.GC Issue 1.00
Page 12
End-of-dial timeout
The end-of-dial timeout is the max. time the device will wait between two dialled
digits to recongnized that the dial is ended. As a alterantive you can use also the
digit
#
to terminate the dial immediately. As default this time is set to 5 second.
To change this value:
DTMF
**8*
<X>
#
SMS
RO-IG5* <Password (default "0")> #8* <X> #
Where <X> can have the value
0
for 10 seconds and a value between
1
to
9
for 1 to 9 seconds.
Example DTMF (timeout 10 seconds)
**8*0#
Example SMS (timeout 10 seconds)
RO-IG5*0#8*0#
Country identifi cation (international access and
country code)
This programming will defi ne the country where the GSM500 has been installed.
This will activate specifi c values for that country like the call progress tones and the
suppression of the international code for national caller on the CLIP.
International access code
The international access code is the fi rst part of the international country code which
defi nes that a international call is been made. For example the internationl access
code in Germany is 00, and the complete international country code is 0049. As
default this code is set to 00. To change this value:
DTMF
**08*
<XXXXX>
#
**61*0#
Example SMS (36 VDC line voltage)
RO-IG5*0#61*0#