74
��
2.6
“READ MODE“
Use this menu to configure the readout options of the
multi
MAUS
PRO
. Data are then read out with “CV MODI-
FICATION,” “CV29,” and “CVBIT.”
Select the respective subitem with the arrow keys and confirm with the “Light /OK” key.
Factory setting:
“BIT AND BYTE”
2.6.1 Enable the sub–item “NO READING” if you are using decoders that cannot be read out. If this option
is not enabled, the
multi
MAUS
PRO
may try to read out the decoder for an extended period of time, which
ties up the system unnecessarily. Please consult the decoder manual for details.
2.6.2 Newer decoders can be read out “BIT ONLY”, which significantly increases the readout speed com-
pared with bytewise reading since only 8 bits per CV must be scanned. The
multi
MAUS
PRO
does read the
data but does not depict the individual bits separately.
2.6.3 It may be practical to read out data “BYTE ONLY” if your decoder is an older model that does not sup-
port bitwise reading. The readout process may take longer depending on the decoder model since up to
256 values must be scanned per CV.
2.6.4 “BIT AND BYTE” is the default and comprehensive readout process for locomotive decoders. Since this
process reads out all data of the CV, especially for CVs with individual bits that have different meanings
(e.g. CV 49), this process may take a very long time.
