To order parts and supplies: 800.343.9353 >> eastwood.com
5
SET-UP
• Thread the Auxiliary Handle onto the threaded hole at the upper left corner of the Grinder Body
and tighten it securely.
• Slip the Arbor Wrench in at a 45° angle in relation to the top of the Grinder Body, between two
of the guard cap screws and rotate the Spindle to align the flats with the Arbor Wrench
(FIG 1)
.
• Place the upward beveled, raised center of the 4” Grinding Wheel over the threaded Arbor Spindle
while centering the 5/8” center hole over the 5/8” diameter offset Spindle Flange
(FIG 2)
.
• Place the Spindle Nut over the threaded Arbor Spindle making sure the 5/8” diameter offset
faces inward and towards the Grinding Wheel hub
(FIG 3)
.
• Thread the Spindle Nut onto the Arbor (making sure the 5/8” offset is centered in the Grinding
Wheel) until it is finger-tight
(FIG 3)
.
FIG. 1
FIG. 2
FIG. 3
Arbor
Wrench
Flats
5/8” Center
✓
✓
✓
✓
Note
Bevel
“In”
✓
Spindle
Nut
✓
