Rockwell ShopSeries RS2212, Руководство пользователя, Страница: 8 / 12

CoRdleSS dRill eN
8
SyMBolS
To reduce the risk of injury, user must read
in struction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
C-Tick approval mark
Do not burn
Do not expose to rain or water
Indoor use only
Positive terminal
Negative terminal
TeChNiCal daTa
Charge voltage
Battery voltage
Rated No load speed
Max. torque
Number of clutch position
Chuck capacity
Max. drilling capacity
Steel
Wood
Weight 220-240V-50/60Hz
12V
0-550/min
12N.m
20+1
Ø10mm
8mm
16mm
1.4kg
ChaRgiNg PRoCeduRe
NoTe:
Before using the tool, read the
instruction book carefully.
iNTeNded uSe
The machine is intended for driving in and loosening
screws as well as for drilling in wood, metal ,and
plastic.
1. ChaRgiNg youR BaTTeRy PaCK
waRNiNg:
The charger and battery pack are
specifically designed to work together so do
not attempt to use any other devices. Never insert or
allow metallic objects into your charger or battery
pack connections because an electrical failure and
hazard will occur.
2. BefoRe uSiNg youR CoRdleSS iMPaCT dRill
Your battery pack is UNCHARGED and you must
charge once before use. Your battery pack will not be
fully charged until you have performed several charge
and discharge operations by charging & working with
your drill. After this your battery pack performance
will improve.
3. To charge the battery (See fig. a)
• Insert the charger plug into a suitable mains
socket. Insert the battery pack (8) into the charger,
the power indicator (green) (a) will illuminate.
• Press the charging start button (c) on the charger
station. The green light (a) will switch off while the
red light (b) will illuminate to indicate that charging
is taking place.
• When fully charged, the red light (b) will go out
while the green light (a) switches back on. Unplug
the charger and remove the battery pack.