Rockwell ShopSeries RS2212, Руководство пользователя, Страница: 7 / 12

7
CoRdleSS dRill eN
6. SeRviCe
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that that safety of the
power tool is maintained.
dRill SafeTy waRNiNgS
1. wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
2. use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. hold power tool by insulated gripping surfaces,
when performing an operation where the
cutting
accessory may contact hidden wiring. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
general Safety warnings for your Battery Charger
waRNiNg: Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
- This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
- Children should be supervised to ensure that they
do not play with the appliance.
additional safety instructions for your Battery
Charger
1. Before charging, read the instructions.
2. For charge Ni-Cd battery pack only.
3. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
4. The battery terminal not connected to the chassis
has to be connected first. The other connection is
to be made to the chassis, remote from the battery
and fuel line. The battery charger is then to be
connected to the supply mains.
5. After charging, disconnect the battery charger
from the supply mains. Then remove the chassis
connection and then the battery connection.
6. Do not charge a leaking battery.
7. Do not use chargers for works other than those for
which they are designed.
8. Before charging, ensure your charger is matching
the local AC supply.
9. The charging device must be protected from
moisture.
10. Do not use the charging device in the open.
11. Do not short out the contacts of battery or
charger.
12. Respect the polarity “+/-“ when charging.
13. Do not open the unit and keep out of the reach of
children.
14. Do not charge the batteries of other manufactures
or ill-suited models.
15. Ensure that the connection between the battery
charger and battery is correctly positioned and is
not obstructed by foreign bodies.
16. Keep battery charger’s slots are free of foreign
objects and protect against dirt and humidity.
Store in a dry and frost-free place.
17. When charging batteries, ensure that the battery
charger is in a well-ventilated area and away from
inflammable materials. Batteries can get hot
during charging. Do not overcharge any batteries.
Ensure that batteries and chargers are not left
unsupervised during charging.
18. Do not recharge non-rechargeable batteries, as
they can overheat and break.
19. Longer life and better performance can be
obtained if the battery pack is charged when the
air temperature is between 18
o
C and 24
o
C. Do not
charge the battery pack in air temperatures below
4.5
o
C, or above 40.5
o
C. This is important as it can
prevent serious damage to the battery pack.
20. Charge only battery pack of the same model
provided by manufacturer and of models
recommended by manufacturer