Rockwell RK2511, Руководство по эксплуатации

Страница: 9 / 24

9
12V CORDLESS SCREWDRIVER ENG
2. thE SCREWDRIVER StOPS bEfORE thE SCREW IS
COmPLEtELy tIGhtENED. Why?
Verify the torque position of the torque adjusting ring,
you can find the torque-adjusting ring between the
chuck and the drill body. Position 1 is the lowest torque
(screw driving force) and position 15 is the highest
torque (screw driving force). Position 16 is for drill
operation. Regulate the torque adjusting ring to a higher
position to reach the best result.
3. REASONS fOR DIffERENt bAttERy PACK WORKING
tImES
Charging time problems, as above, and having not
used a battery pack for a prolonged time will reduce the
battery pack working time. This can be corrected after
several charge and discharge operations by charging &
working with your tool. Heavy working conditions such
as large screws into hard wood will use up the battery
pack energy faster than lighter working conditions. Do
not re-charge your battery pack below 32°F (0°C) and
above 113°F (45°C) as this will affect performance.
mAINtENANCE
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
WARRANty
LImItED 30-DAy EXChANGE POLICy
During the first 30 days after date of purchase, you may
exchange a tool which does not work properly due to
defects in materials or workmanship by returning the
power tool to the retailer where it was purchased. To
receive a replacement power tool, you must present
a dated proof of purchase and return all original
equipment packaged with the original product. The
replacement power tool will be covered by the limited
warranty for the balance of the two year period from the
date of the original purchase.
LImItED tWO yEAR WARRANty
The manufacturer warrants that, for a period of 2 years
from the date of purchase, this product shall be free of
defects in materials and workmanship. We will repair
or replace, at our option, this tool during the warranty
period, provided that the tool is sent postage prepaid to
an approved service center with all original equipment
and a dated proof of purchase.
WhAt IS NOt COVERED
This warranty applies only to the original purchaser at
retail and is not transferable. This warranty does not
apply to accessories or batteries.
This warranty does NOT cover malfunction, failure or
defects due to:
- abnormal use, abuse, neglect, accidents, alteration or
repairs by other than approved service centers
- normal tool wear and tear.
- rental use.
The manufacturer makes no warranties, representations
or promises as to the quality or performance of its
power tools other than those specifically stated in this
warranty.
fOR SERVICE
Contact the toll free helpline at 866-514-7625 to be
directed to an approved service center. When you send
the tool for warranty service, you must also include a
dated proof of purchase.
ADDItIONAL LImItAtIONS
Any implied warranty granted under state law, including
warranties of merchantability or fitness for a particular
purpose, are limited to two years from the date of
purchase. The manufacturer is not responsible for
direct, indirect, incidental or consequential damages.
Some states and provinces do not allow limitations on
how long an implied warranty lasts and/or do not allow
the exclusion or limitation of incidental damages, so
the above limitations and exclusions may not apply to
you. This warranty gives you specific legal rights, and
you may also have other rights which vary from state to
state or province to province.
The manufacturer declines any responsibility in
regards to civil liability arising from abusive use or not
in conformity with proper use and maintenance of the
machine as described in the operator’s manual.
After the purchase, the manufacturer recommends
proper maintenance of the machine and to read the
operator’s manual before using the machine.