Rockwell Automation Allen-Bradley PowerFlex 700 B Series, Руководство пользователя, Страница: 99 / 228

Programming and Parameters 3-59
Applications File
INP
U
TS &
OUT
PUTS
Di
gi
ta
l Out
put
s
394 [Dig Out Mask]
Sets the mask that is applied to the selected value in [Dig Out Param]. A bit (AND/
OR) is applied, which is selected by the [Digital Outx Sel]. All bits with zeros in the
mask are ignored.
Example:
Fi
le
Gr
ou
p
No.
Parameter Name & Description
See page 3-2 for symbol descriptions
Values
Relate
d
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 = Bit selected
0 = Bit Masked
x = Reserved
Bit #
Factory Default Bit Values
Mask OR: If Any bits in the value are set in the mask, then the output is On.
Mask AND: If All bits in the value are set in the mask then the output is On.
Selected Value 0 0 0 0 1 1 0 0 1 1 1 1 0 0 0 0
Mask 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0
Result Output On
Selected Value 0 0 0 0 1 1 0 0 1 1 1 1 0 0 0 0
Mask 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0
Result Output Off
Fi
le
Gr
oup
No
. Parameter Name & Description
See page 3-2 for symbol descriptions
Values Re
la
ted
APPLICA
T
IONS
To
rque
Pr
o
vi
n
g
600 [TorqProve Cnfg]
Enables/disables torque/brake proving feature. When “Enabled,” [Digital Out1 Sel]
becomes the brake control. Note: this value is not changed when parameters are
reset to factory defaults (
page 3-35 ).
Option Descriptions
Enable
Enables TorqProve features.
Encoderless Enables encoderless operation – bit 0 must also be enabled.
MicroPosSel A “1” allows the Micro Position digital input to change the speed
command while the drive is running.
Preload Sel “0” uses the last torque for preload. “1” uses “TorqRef A” if
commanded direction is forward and “TorqRef B” for reverse.
Load Spd Lim Enables drive to perform load calculation at base speed. Drive
will then limit operation above base speed depending on load.
NoEnclsBkSlp A “1” Disables the partial Brake Slip routine from the drive when
encoderless is selected.
0 0 0 0 0 0 x x x x x x x x x x
10 0 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 = Enabled
0 = Disabled
x = Reserved
Bit #
Factory Default Bit Values
Enab
le
Encoderless Micr
oP
osSel
Preload Sel Load Spd
Lim
NoEnc
lsBkSlp