Rockwell Automation Publication 2711P-QS002B-EN-P - April 2022
4
Getting Started
Summary of Changes
This publication contains new and updated information as indicated in the following table.
Before You Begin
Verify that you have all of the following components:
•
PanelView™ Plus 7 Performance Series B terminal (Series C for Stainless Steel)
•
Removable DC power terminal block, black (included with the terminal)
•
1585J Cat 5e Ethernet cable, or equivalent (purchased separately, if required)
•
Optional peripheral devices (for example, mouse or keyboard, purchased separately)
•
Product information (included with the terminal)
•
Cutout template (included with the terminal)
•
Mounting levers for panel installation (for aluminum terminals, included with the terminal)
•
Stainless steel terminals come with the following items included in the box:
• Mounting clips for panel installation
• Backing plate
• Hygienic gasket
In addition to these items, make sure that you have ready access to the following publications:
• PanelView Plus 7 Performance Terminals User Manual, publication
• FactoryTalk™ ViewMachine Edition User Manual, publication
Power up the Terminal
1. Unpack the terminal and any other components you ordered.
2. Place the terminal face down on a stable surface.
3. If you are using a mouse or a keyboard, insert each connector into one of the USB ports located at the bottom of
the terminal.
Topic
Page
Added an Important note to the section entitled Power up the Terminal.
Added an Important note to the section entitled Using ControlFLASH.
Updated the Additional Resources table.
1
1
USB Ports
Network Ports
Bottom View of PanelView Terminal
DC Power Input
