manualshive.com logo in svg

Rockwell Automation Allen-Bradley Kinetix MMA-B080 Series, Руководство по установке

Поделиться
Скачать
Rockwell Automation Allen-Bradley Kinetix MMA-B080 Series Скачать руководство пользователя страница 50

50

Rockwell Automation Publication MM-IN001B-EN-P - February 2022

Kinetix MMA Asynchronous Main Motors Installation Instructions

Blower Replacements

All motors ship with an attached blower housing. Depending on your configuration, the blower housing may have an axial blower, a radial blower, or an IC17 adapter shroud 
attached to it. It is possible to replace a blower housing or to convert between blower configurations in some cases.

See 

Blower Conversions

 for available conversions and procedure references.

To replace a blower housing with the same configuration, use this list as a reference:

•

Axial blower to axial blower
- see 

Install the IC17 Clean-air Kit (Includes: Replace Axial Blower)

, 

step 4

. 

•

Radial blower to radial blower
- see 

Instructions to Reposition or Replace the Radial Blower Assembly

•

IC17 clean-air to IC17 clean-air
- see 

Install the IC17 Clean-air Kit (Includes: Replace Axial Blower)

, 

step 6

…

step 9

Blower Conversions

The following are possible blower conversions for axial and radial blowers. To complete 
the conversion, use the information that follows.

•

Axial blower or radial blower to IC17 clean-air option
- see 

Install the IC17 Clean-air Kit (Includes: Replace Axial Blower)

•

Axial blower to radial blower
- is not an available conversion

•

Radial blower to axial blower
- see 

Instructions to Reposition or Replace the Radial Blower Assembly

 to 

remove the radial blower; see 

Install the IC17 Clean-air Kit (Includes: Replace 

Axial Blower)

 

step 4

 for guidance to connect the axial blower 

•

IC17 clean-air option to axial blower
- see 

Install the IC17 Clean-air Kit (Includes: Replace Axial Blower)

 

step 8

 for 

guidance to remove cover from blower housing; see 

Install the IC17 Clean-air 

Kit (Includes: Replace Axial Blower)

 

step 4

 for guidance to connect the axial 

blower

•

IC17 clean-air option to radial blower
- see 

Install the IC17 Clean-air Kit (Includes: Replace Axial Blower)

 

step 8

 for 

guidance to remove cover from blower housing; see 

Instructions to 

Reposition or Replace the Radial Blower Assembly,

 start at 

step 9

 to install 

and connect the radial blower

Do not disconnect the fan or the blower terminals to replace the blower 
housing.

IMPORTANT

The radial blower is delivered in the top mounted position. If an alternate orientation is required, only an 
experienced technician can install, remove, or reposition the blower. Complete these tasks on a workbench 
and not in a mounted position. Replacement of the blower housing requires the torque specifications as 
listed in 

Table 53

.

Shaft Height
180 and 225 
only

Shaft Height
100, 132, and 160

only

4X

Installation of IC17 clean-air kit 
on a radial blower housing

Blower housing motion direction

Radial blower mating to blower housing 
(

orientation may vary)

Feedback connector 
removal on a radial 
blower

Table 52 - Blower Conversion Options

Possible Conversions

Shaft Height

Initial Option

Converts To

080

100

132

160

180

225

Axial blower

IC17 clean-air

—

Yes

Radial blower

IC17 clean-air 

—

No

Yes

Axial blower

Radial blower

No

Radial blower

Axial blower

—

No 

(1)

(1)

This conversion requires extension rods that are not available as a spare part. See 

Table 57 on page 55

 for dimensions and specifications.

IC17 clean-air 

Axial blower

—

Yes

No

IC17 clean-air 

Radial blower

—

No

No 

(2)

(2)

This conversion requires the radial blower cover that is not available as a spare part. 
Dimensions and specifications can be found in the Knowledgebase article: 

Kinetix MMA 

Frequently Asked Questions

, for additional information. See also 

Figure 21 on page 53

.

ATTENTION: 

For all blower conversions or 

replacements, remove incoming power from the 
motor and the blower. Allow time for any stored 
energy to discharge.

Содержание Allen-Bradley Kinetix MMA-B080 Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды