5/25/2018
530800 - Fuse and Line Filter sizing for the Kinetix 5500 drive
https://rockwellautomation.custhelp.com/app/answers/detail/a_id/530800
5/10
characteristics such as inrush in order to have a symmetrical AC power up.
AC/DC sharing will support the use of the capacitor module WHEN three phase power is utilized. In this
frame 2 drive, 2198-H015-ERS, even though single phase configuration is available, the 2198-CAPMOD-
1300 cannot be used.
For a line filter use, the total AC amps is approximately 20.8 Amps RMS for this configuration. A 2198-
DB20-F is 20 Amps continuous and cannot be used. Therefore, use 2198-DB42-F as that can handle the
current requirements of the AC/D Sharing configuration shown above.
AC Sharing MUST be used with both AC sharing bus bar and DC control power bus bars.
The 2198-H015-ERS is a frame 2 Kinetix 5500, as referenced in the
Kinetix 5500 User Manual
(http://literature.rckwellautomation.com/idc/groups/literature/documents/um/2198-um001_-en-p.pdf) &
Kinetix
Servo Drive Technical Documentation
(http://gmc-td003_-en-p.pdf/)
Use Qty 1, 2198-H040-ADP-IN for the first 2198-H015-ERS which will allow you to bring in both AC L1-
L3(and ground) DC control power and have a connection for the first DC bus bar to drive 2.
Use Qty 3, 2198-H040-ADP-T for each of the next 4, 2198-H015-ERS to allow AC sharing.,DC control power
sharing and DC bus power sharing
In this configuration, qty 4, 2198-H015-ERS are used. Each converter section can put 1.6 kW (230 Vac) or
3.2 kW(460 Vac) when in a Shared DC bus or standalone inverter use. When used in Shared AC/DC
configuration, the SUM of the converter output must be derated or limited to 70% of continuous power
available. In this instance, 4 x 1.6 kW x .7 = 4.48 kW (230 Vac) or 4 x 3.2 kW x .7 = 8.96 kW (460 Vac). The
2198-HR015-ERS inverter power continuous out in this configuration cannot exceed either of these values.
Three phase power MUST be used for AC/DC Sharing. Single Phase operation is not supported in AC/DC
Sharing.
4.
SHARED DC BUS
Shared DC Bus is comparable operation to the Kinetix 6000 series where the DC bus is supplied by the leader
drive to the followers that are on the DC bus.
