Rockwell Automation Allen-Bradley Guardmaster 442G-MABE1, Руководство пользователя

Страница: 42 / 60

42 Rockwell Automation Publication 442G-UM002A-EN-P - December 2016
Chapter 4 Status and Troubleshooting
Table 1 - Network Status Indicators
Table 2 - DIP Switch Assignment
Factory setting: all switches in OFF position.
Status Indicator Color Significance
ACT 1
ACT 2
OFF
Green flashing
Yellow flashing
No activity
Port activity
Collision
LNK1
LNK2
OFF
Green
Yellow
Red
No connection
Connection
Port disabled
Major NIC fault
MOD Green flashing
Green
Red flashing
Red
Red/green flashing
Idle or standby
Normal operation
Recoverable fault
Unrecoverable fault
Self-test/startup
NET Green flashing
Green
Red flashing
Red
Red/green flashing
No network connection
Network connection
Time out
Communication failed
Network error
Switch Designation Function
Block 2 1 n.c. Reserved
2 DHCP OFF position
ON position = IP address via DIP switch
= IP address via DHCP
(all other DIP switches in position = OFF)
TIP: To identify the module in the control system, set the DIP
switch to ON position. This will allow the module to be
recognized by the DHCP server. Use this if you do not know the
IP address (See Restoring the Module to DHCP Mode on
page 26 .)
3 IP bit 7 Enter the last octet of the IP address.
4 IP bit 6
5 IP bit 5 Example:
6 IP bit 4 192.168.1.[DIP switch code, binary
I----------I
Block 1 4 IP bit 3 Fixed part
3 IP bit 2 The following applies:
2 IP bit 1 OFF position = 0
1 IP bit 0 ON position = 1