Rockwell Automation Allen-Bradley Guardmaster 442G-MAB B-U Series Скачать руководство пользователя страница 14

Страница: 14 / 68

Rockwell Automation Publication 442G-UM001B-EN-P - May 2016

Chapter 2

Safety Concept

The Access Box must be installed in accordance with the applicable regulation

and standards.

While the Access Box can be used for PLe and Category 4 applications, the

installer must comply with guard requirements (for example, EN/ISO13854

and EN/ISO 13857) and in some cases also minimum (safe) distance

requirements (for example, EN/ISO 13855).

The installed system, including the safety control system and the means by

which the machine stops, must achieve the needed safety performance. The



Access Box is one element in the safety system.

Before safety components are used, a risk assessment must be performed on the

machine in accordance with:

• EN ISO 13849-1, Safety of machinery. Safety related parts of control

systems. General principles for design, Annex B

• EN ISO 12100, Safety of machinery – Basic concepts - General

principles for design - Risk assessment and risk reduction.

Correct use includes compliance with the relevant requirements for

installation and operation, in particular

• EN ISO 13849-1, Safety of machinery. Safety related parts of control

systems. General principles for design

• EN ISO 14119, Safety of machinery. Interlocking devices that are

associated with guards. Principles for design and selection

• EN 60204-1, Safety of machinery. Electrical equipment of machines.

General requirements.

Additional guidance on guards, guard locking and guard interlocking is found

in:

• EN/ISO 12100 Safety of machinery—General principles for design—

Risk assessment and risk reduction

• EN/ISO 13855 Safety of machinery—Positioning of safeguards

concerning the approach speeds of parts of the human body

• EN/ISO 13857 Safety of machinery—Safety distances to prevent

hazard zones from being reached by upper and lower limbs

• EN/ISO TR 24119 Technical report that is associated with EN ISO

14119 addressing the logical serial connection of interlocking devices

• EN/ISO 14120 General requirements for the design and construction

of guards

Содержание Allen-Bradley Guardmaster 442G-MAB B-U Series





































































Результаты поиска

Содержание Allen-Bradley Guardmaster 442G-MAB B-U Series

Отзывы:

Похожие инструкции для Allen-Bradley Guardmaster 442G-MAB B-U Series

Бренды по названию

Популярные бренды

Rockwell Automation Allen-Bradley Guardmaster 442G-MAB B-U Series, Руководство пользователя

Результаты поиска

Содержание Allen-Bradley Guardmaster 442G-MAB B-U Series

Отзывы:

Похожие инструкции для Allen-Bradley Guardmaster 442G-MAB B-U Series

Бренды по названию

Популярные бренды