manualshive.com logo in svg

Rockwell Automation 6186-M12AL, Руководство пользователя

Поделиться
Скачать
Rockwell Automation 6186-M12AL Скачать руководство пользователя страница 14

14

Publication 6186M-UM001J-EN-P - July 2008

Chapter 2

        Installing the Monitor

Installation Guidelines

Follow these guidelines to make sure your product provides safe and 
reliable service.

•

The installation site must have sufficient power.

•

The enclosure must have sufficient space around air inlets and 
outlets to provide the circulation necessary for cooling. Never let 
air passages become obstructed.

•

The

 

ambient air temperature must not exceed the maximum 

operating temperature. Consider heat produced by other devices 
in the enclosure. You may need a user-supplied fan, heat 
exchanger, or air conditioner to meet this condition.

•

The humidity of the ambient air must not exceed specified 
limits.

•

In very dry environments, static charges build up readily. Proper 
grounding of the equipment through the ac power cord helps to 
reduce static discharges, which may cause shocks and damage 
electronic components.

•

The enclosure or cover must remain in place at all times during 
operation. The cover provides protection against high voltages 
inside the product and inhibits radio-frequency emissions that 
might interfere with other equipment.

ATTENTION

To maintain an electrically safe installation, the product must 
be connected to earth ground when installed. Follow the 
appropriate grounding requirements associated with your 
specific product type as described in this installation document.

TIP

Hot air rises. The temperature at the top of the enclosure is 
often higher than the temperature in other parts of the 
enclosure, especially if air is not circulating.

IMPORTANT

The product can operate at a range of extremes. However, the 
life span of any electronic device is shortened if you 
continuously operate the product at its highest rated 
temperature.

Содержание 6186-M12AL

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды