MicroLogix™ 1000 Programmable Controllers
7
Publication 1761-IN001C-EN-P - March 2008
Safety Considerations
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or
non-hazardous locations only (when product or packing is marked).
Use only the following communication cables in Class I, Division 2, Hazardous
Locations.
WARNING
!
Explosion Hazard:
•
Substitution of components may impair suitability for Class
I, Division 2.
•
Do not replace components or disconnect equipment
unless power has been switched off and the area is
known to be non-hazardous.
•
Do not connect or disconnect connectors while circuit is
live unless area is known to be non-hazardous.
•
This product must be installed in an enclosure. All cables
connected to the product must remain in the enclosure or
be protected by conduit or other means.
Environment Classification
Communication Cable
Class I, Division 2, Hazardous Environment
1761-CBL-PM02 Series C
1761-CBL-HM02 Series C
1761-CBL-AM00 Series C
1761-CBL-AP00 Series C
2707-NC8 Series B
2707-NC9 Series B
2707-NC10 Series B
2707-NC11 Series B
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive