Rocktron INTELLIFEX LTD Скачать руководство пользователя страница 4

Страница: 4 / 60

1. Introduction

The Rocktron Intellifex

LTD is a 24-bit digital effects processor utilizing three

individual 16-bit converters and Sigma-Delta A/D conversion, achieving a 64x

oversampling rate and better than 100dB dynamic range. The Intellifex LTD is totally

programmable and allows for complete MIDI control. The unit features pitch shifting,

8 voice stereo chorusing effects, digital delay effects including 2-tap, stereo and ping

ponging effects, unsurpassed digital reverb quality and highly flexible configuration

programming allowing for simultaneous operation of up to 5 effects plus complete

mixing capabilities. The unit also offers Hush Systems first fully digital implementa-

tion of patented HUSH

noise reduction at the units input, along with delay and

reverb ducking capabilities.

For a thorough explanation of the Intellifex

LTD and its functions, please read

this manual carefully and keep it for future reference. A better understanding of how

the Intellifex

LTD operates will help make designing your own preset sounds much

easier.

After removing the Intellifex

LTD from the box, save all packing materials in

case it becomes necessary to ship the unit.

WHAT MAKES THE INTELLIFEX

LTD UNIQUE?

* Super quiet operation due to use of digital HUSH

and high quality 16-bit converters.

* High purity sound due to the use of a 64X oversampling A/D converter, which samples the

signal 64 times as often as a conventional converter, and also due to the use of a separate dual
D/A converter. Most "bargain" digital effects units use a single converter multiplexed 3 ways,
for decidedly higher distortion and lower dynamic range.

* 24-Bit processing and memory circuits to maintain maximum dynamic range.

* Ability to store up to 8 unique MIDI controller patches with each preset.

* Very high quality effects algorithms.

* Highly stereo effects with panning available on almost all signals.

* 8 Voice chorusing with an enormous number of parameters for the richest chorus ever.

* High quality 4 voice pitch shifting over 3 full octaves.

* 2-voice pitch shifting or 4-voice chorusing offered simultaneously with Hush

, Delay and

Reverb.

* Programming via knobs instead of push buttons.

* Easy to read, wide viewing angle display.

1. Introduction

Содержание INTELLIFEX LTD





























































Результаты поиска

Содержание INTELLIFEX LTD

Отзывы:

Похожие инструкции для INTELLIFEX LTD

Бренды по названию

Популярные бренды

Rocktron INTELLIFEX LTD, Руководство пользователя

Результаты поиска

Содержание INTELLIFEX LTD

Отзывы:

Похожие инструкции для INTELLIFEX LTD

Бренды по названию

Популярные бренды