Rocktron INTELLIFEX LTD Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 60

Rocktron INTELLIFEX LTD Скачать руководство пользователя страница 20

17

D. DUCKER SECTION

The process of Ducking enables the user to suppress the level of a given signal or effect dynamically, depen-

dent upon the presence of another signal which is desired to be prominent. The Ducking feature of the Intellifex

LTD works in conjunction with the Delay and Reverb sections to attenuate the delay and/or reverb level while a

phrase is being played (resulting in a less cluttered, more intelligible sound), yet return each to its original level

when the phrase ends - thus allowing for the full decay of the delayed and/or reverberated signal.

DUCKER PARAMETERS

Ducker

In the HUSH; Delay; Ducker configuration, this parameter determines whether

the Ducker is off or on.

In the HUSH; Chorus; Delay; Reverb and HUSH; Pitch Shift; Delay; Reverb

configurations, this parameter determines whether the Ducker is either (A) off,

(B) operating on the delay, (C) operating on the reverb, or (D) operating on

both the delay and reverb.

Sensitivity

This parameter determines the threshold point above which the ducker will

begin attenuating the delay and/or reverb signal. Until the input signal reaches

this level, the delay/reverb signal will not be affected.

Attenuation

This parameter determines how much the delayed signal is attenuated (muted).

It may be set for only a slight change in signal level or it can completely

attenuate the delay/reverb signal so that no delayed or reverberated signal

passes while ducking is active.

Release Rate

This parameter is adjustable from .2 seconds to 9 full seconds, and determines

the length of time it takes for the muted delay signal to return to its original

signal level after the input signal falls below the threshold point set by the

Sensitivity parameter.

«
...
18
19
20
21
22
...
»

Содержание INTELLIFEX LTD





























































Отзывы:

Нет отзывов