RockHound BrushHound 30EX, Руководство пользователя

Страница: 11 / 28

Some examples of Model Specific Mounts
6
III) Shut Down Procedure
5) When work is completed, disengage auxiliary hydraulics and position it for storage or transport (See the
“Storage and Transport” section for details on proper storage). Shut off Power Unit and set parking brake.
Wait for the Attachment to stop rotating and allow hydraulic circuits to bleed back to reservoir, as they can
still be pressurized even when turned off, before approaching or allowing others to approach the Attachment.
6) Visually inspect hydraulic motor, motor protection valve and other areas for signs of excessive heat, debris
accumulation or leaks. Do not touch these areas with bare skin as they can be very hot. Hydraulic leaks
should never be checked for with hands as the fluid may have adequate force to puncture the skin which
would require immediate medical attention and can lead to gangrene within hours. Instead, if you believe
there is a hydraulic leak , check with a piece of cardboard or paper.
EX Series
by